Filter
Top Products
the socket from the bottom to avoid damaging of the cable.
Level the scale by adjusting the four feet. The scale should be adjusted such that the
bubble in the spirit level is in the centre of the level and the scale is supported by all four
feet.
Turn the power ON using the switch located on the right side of the base.
The unit will display the software revision number in the Weight window and count down
to zero while performing a self-test.
When ready all three displays will show zero.
Level the scale by adjusting the four feet. The scale should be adjusted such that the
bubble in the spirit level is in the centre of the level and the scale is supported by all four
feet.
Turn the power ON using the switch located on the right side of the base.
The unit will count down while performing a self-test.
When ready the displays will show zero.
3.3 DISPLAY WINDOWS
Not applicable for South Africa and Far East
The window for the Weight has arrows to indicate when the scale is at zero or if the scale
is displaying a net weight (if a tare value has been entered). It also indicates when the
scale is stable.
© Adam Equipment Company 2007
6