Adam Equipment AZplus 30 Building Set User Manual


 
4.7 Kg/100g KEY, PRICE PER KILOGRAM, PRICE PER 100g
The [kg 100g] key will change the scale from using a price per kilogram to price per 100g.
It will also change the arrows under the Unit Price display to show the selection.
This information is also saved for the PLU values that are stored in the memory.
NOTE:
This is not applicable for AZplus for South Africa and Far East.
The current software revision number is 1.61. For all revisions from 1.27 and
above, the Price per kilogram and per 100 gram key can be disabled at the factory
for the scales to be used in South Africa and Far East. This is done by linking the
j
umper at K5 position on the PCB.
4.8 AUTO SLEEP FUNCTION
This function may be enabled or disabled by the user. If enabled, when the scale is not
used for some time (as pre-set by the user under this function) it automatically switches
off. To set this parameter,
During self-checking, press [kg 100g] and release at once. The display
shows “SLEEP nodE”.
Press [PLU4] key to scroll through the auto sleep values.
0 Auto sleep mode disabled
1” Auto sleep after 1 minute
5 Auto sleep after 5 minutes
30 Auto sleep after 30 minutes
Press [Tare] to set the value. The scale returns to zero.
NOTE: For AZplus for South Africa and Far East, press the [Zero] key to enter Auto Sleep
function.
© Adam Equipment Company 2007
13