Adam Equipment AZplus 30 Building Set User Manual


 
© Adam Equipment Company 2007
12
4.5 ENTERING VALUES FOR THE PLU s
To store values into the memory for the PLU s follow the procedure.
Entering values for PLU1 to PLU3 keys
Enter the unit price value using the keypad, selecting either price/kg or price/100g if
needed.
Press and hold down the key [PLU1], [PLU2] or [PLU3] for more than 3 seconds. The
scale displays “PLU” “ 1” ”SAVEd
Entering values for the [PLU4] key
Enter the unit price value using the keypad, selecting either price/kg or price/100g if
needed.
Press and hold down the key [PLU4] for more than 3 seconds.
The scale will show “SAVE” “POS 00” ” ”
If no number is entered for 00 within a few seconds, the unit price entered will be saved for
position 4 which can be recalled in future by using the [PLU4] key. The display will show
PLU” “ 4” ”SAVEd” and the scale will return to weighing.
OR
Enter any number (up to 39) for saving the unit price in the desired position. For example,
press [1] and [4] for the position 14. It will show “SAVE” “POS 14” ” ” and then “PLU
SAVEd” ” ” before returning to weighing.
To change the earlier saved value against a particular PLU, simply repeat the process.
4.6 AUTO CLEAR KEY
The [Auto Clear] key will enable the Auto Clear function.
When this function is active the scale will automatically clear (set to zero) the unit price
when the last item to be weighed has been removed from the scale.
When the Auto Clear is active the Auto Clear indicator (arrow) on the LCD will be ON.
Pressing the [Auto Clear] key will turn off the function and the indicator will disappear.
Pressing it will turn the function on again.