Filter
Top Products
9
4. As necessary, apply localized pressure to close the adhered seam of the 3M
™
Anti-Fatigue Mat Runner 9910 Series. It may be necessary to hold pressure
for 10-15 seconds until the adhesive bonds the two pieces. (Figures 6 & 7)
5. The beveled edges of the seam are adhered separately. Pull the beveled edge
up to expose its edge and apply adhesive then push the two beveled edges of
the adhered sections together. (Figures 8 & 9)
6. Adhere subsequent runner seams in the same fashion, proceeding down the
length of the runner.
Figure 6
Figure 8
Figure 7
Figure 9