Filter
Top Products
4
To reduce the risk associated with hazardous voltage due to 3M
™
Anti-Fatigue Mats 9900 Series
being used in areas requiring insulating type matting:
• Anti-Fatigue Mats are electrically conductive – do not use these mats in areas with possible
exposure to high voltage.
To reduce the risk associated with hazardous voltage due to Anti-Fatigue Mats being installed
with an incorrect grounding lead:
• Do not use Anti-Fatigue Mats without using the correct grounding cord, 3M
™
Ground Cord 3040.
To reduce the risk associated with hazardous voltage due to Anti-Fatigue Mats being grounded
through an alternate ground path:
• Grounded equipment or objects should not contact the mat. This could bypass the 1.0 MΩ resistor in
the ground cord.
To reduce the risk associated with back strain due to the heavy weight of the mats:
• Follow safe lifting procedures during installation or moving.
To reduce the risk associated with foot slip hazards due to improper maintenance:
• Follow proper cleaning procedures as outlined in this instruction manual.
• Do not use paste wax or vinyl cleaners.
• Do not treat the mat surface with any protective films or floor finishes.
To reduce the risks associated with improper cleaning of the mats, which, if not avoided may
result in electrostatic overstress damage to static sensitive electronic components:
• Follow proper cleaning procedure outlined in this instruction manual.
• Do not use hydrocarbon solvents such as paint thinner.
• Do not use oil-based cleaning solutions.
To reduce the risks associated with improper cleaning of the mats, which, if not avoided may
result in physical damage to the mats:
• Follow proper cleaning procedure outlined in this instruction manual.
• Do not use hydrocarbon solvents such as paint thinner.
• Do not use oil-based cleaning solutions.
WARNING:
CAUTION: