Filter
Top Products
11
• For small mat areas apply the cleaner with a trigger spray bottle. Scrub and
remove excess liquid from the mat surface with a dampened sponge or lint-
free cloth.
• For larger mat areas apply the cleaner with a mop and bucket. To reduce film
build-up change out the cleaning solution frequently.
Note: It is not necessary to rinse the mat surface.
5.0 Optional Accessories
3M
™
Test Kit for Static Control Surfaces 701
A lightweight, user-friendly megohmmeter plus all of the components needed to
make testing mats and other surfaces simple and accurate.
701 Test Kit for Static-Control Surfaces
Kit contains:
1 Megohmmeter 12 0z. (340 g);
1.8 x 3.3 x 4.6 in. (4.57 x 8.38 x 11.68)
2 Test Weights 5 lbs. (2.27 kg) each
1 Insulated Bulldog Clip
1 Alligator Clip
1 Continuity Test Plate
2 Batteries (3.6V and 1.5V)
1 Operator’s Manual
1 Molded Carrying case
High-performance, all-purpose cleaner. For floors,
walls and other non-porous surfaces.
Contact: 3M Building and Commercial Services
Divison Care Division
1-800-852-9722
www.3M.com/commcare
Molded-in male snap fastener with integral 1-meg-
ohm resistor on one end, solderless terminal on other.
Connects all 3M
™
Anti-Fatigue Mats and Runners
9900 Series to building ground.
3M
™
General Purpose Cleaner (Product No. 8, 3M
™
Twist ‘n Fill System)
3M
™
Ground Cord 3040, 15 ft. with 10 mm Snap