Filter
Top Products
10
4.0 Cleaning Guidelines
Note: 3M™ Anti-Fatigue Mats 9900 Series are constructed of durable SBR rubber that can be easily
cleaned with the recommended cleaner and techniques below. Clean mats as needed. The following
recommendations are provided to prolong the life of your mat product:
1. Remove loose debris from the surface.
• Vacuum with air suction or sweep with a stiff broom.
Note: Use of a vacuum with rotating brushes is not recommended. A rotating brush can leave
permanent marks on the mat surface and burn in an image.
2. Use 3M
™
General Purpose Cleaner Ready-to-Use (Product No. 8, 3M
™
Twist
‘n Fill System) or comparable neutral cleaner. Follow label directions for
proper cleaner dilution.
To reduce the risk associated with back strain due to the heavy weight of the mats:
• Follow safe lifting procedures during installation or moving.
To reduce the risk associated with foot slip hazards due to improper maintenance:
• Follow proper cleaning procedures as outlined in this instruction manual.
• Do not use paste wax or vinyl cleaners.
• Do not treat the mat surface with any protective films or floor finishes.
To reduce the risks associated with improper cleaning of the mats, which, if not avoided may
result in electrostatic overstress damage to static sensitive electronic components:
• Follow proper cleaning procedure outlined in this instruction manual.
• Do not use hydrocarbon solvents such as paint thinner.
• Do not use oil-based cleaning solutions.
To reduce the risks associated with improper cleaning of the mats, which, if not avoided may
result in physical damage to the mats:
• Follow proper cleaning procedure outlined in this instruction manual.
• Do not use hydrocarbon solvents such as paint thinner.
• Do not use oil-based cleaning solutions.
WARNING:
CAUTION: