3M 490 Doll User Manual


  Open as PDF
of 14
 
4 5
1
INSTRUCTIONS FOR USE – Wells, Buttons, & Display Interpretation
1
11
8
4
7
9
2
3
5
10
6
Please familiarize yourself with the face of the 3M™Attest™ Auto‑reader490:
Wells
1. Incubation/Reader Wells – The 3M™Attest™ Auto‑reader490 has ten
incubationwells.
Buttons
2. Information / Up Arrow Button
3. Temperature / Down Arrow Button
4. Buzzer Alarm OFF / Enter Button
Information Display
5. LCD Display – Display isbacklit.
6. LCD Display – Example of Error Message for well #6
7. LCD Display – Example of Remaining Incubation Time for well#10
8. LCD Display – Example of Positive ( + ) BI result for well #8
9. LCD Display – Example of Negative ( ‑ ) BI result for well #9
10. LCD Display – Alarm Enabled Indicator
Color‑Coded Configuration Indicator
11. Color‑coded incubation well configuration sticker
INSTRUCTIONS FOR USE – 3M™Attest™ Auto‑reader490
Configuration
Note: Ideally, the 3M™Attest™ Auto‑reader490 should be empty (i.e. have no incubating
BIs) when it isreconfigured.
Press the and buttons on the front of the 3M™Attest™ Auto‑reader490
simultaneously for 3 seconds to enter configuration mode. Once in configuration mode,
use the Up and Down buttons to set the 3M™Attest™ Auto‑reader490 clock,
buzzer and incubation well configuration as desired. The
button acts as an “Enter”
key and moves the flashing cursor to the next changeablesetting.
Setting the 3M™Attest™ Auto‑reader490 Clock
The 3M™Attest™ Auto‑reader490 date and time are displayed in this format:
YYYY‑MM‑DD HH:MM, with the time displayed using a 24 hour clock. To change the year,
if necessary, push the up or down buttons to set desired year, then press to advance
to the month, adjust as necessary and press
to advance to the day. Use the
button to move to the time and set the hours andminutes.
Setting the Audible Alarm Function
Move across the top row of text by pushing the button. The flashing “B” in Buzzer
indicates this is a changeable setting. It is recommended this be set at “Buzzer Enabled”
to audibly alert the operator to a positive BI but it may be set to “Buzzer Disabled” by using
either the up or downbutton.
Note: If Buzzer Disabled is selected, and the changes accepted, the speaker icon (
) will
disappear from the LCD panel and the alarm will be disabled for all positive 3M™Attest™
Super Rapid Readout Biological Indicators, error codes, and caution code alarm warnings.
Note: The 3M™Attest™ Auto‑reader490 Display backlight flashes whenever an
audible alarm sounds. Disabling the audible alarm does NOT disable the LCD display
backlightflashing.
Press
to select the desired option and advance to the bottom row oftext.
 previous next