3M 490 Doll User Manual


  Open as PDF
of 14
 
10 11
1
Using the Configuration Page
Certain set‑up and configuration options are available on the password protected 3M™Attest™ Auto‑reader490 Web App Configuration page. Ideally, the 3M™Attest™
Auto‑reader490 should be empty (i.e. have no incubating BIs) when it is reconfigured. Navigate to the Configuration page by entering either:
1) http://attestxxxxxx/protect/config.htm (where xxxxxx is the 6‑digit unit serial number), or
2) http://xxx.xx.xxx.xx/protect/config.htm (where xxx.xx.xxx.xx is the IP address) in the web browser address bar and pressing Go or enter. A security screen will appear. Fill in the
editable fields as follows:
User name: manager
Password: Attest
and pressOK.
Click on the desired radio buttons to changesettings.
Auto‑reader Type Select the configuration desired for wells 1‑5/6‑10 by clicking on the appropriate radiobutton.
Language Selected setting indicates language in which text on 3M™Attest™ Auto‑reader490 Web App pages will appear on the computer/smart phonescreen.
Pushbutton
Configuration
Selecting Enable
allows the user to configure the 3M™Attest™ Auto‑reader490 from the buttons on the unititself.
Selecting Disable
prevents the user from being able to configure the 3M™Attest™ Auto‑reader490 from the buttons on the unititself.
Buzzer
Configuration
Selecting Enable enables the audible alarm. The speaker icon will appear on the LCDpanel.
Selecting Disable
disables the audible alarm. The speaker icon will disappear from the 3M™Attest™ Auto‑reader490 LCDpanel.
Attest Auto‑reader
490 Nickname
Naming the 3M™Attest™ Auto‑reader490 may be useful in facilities with multiple units. The assigned nickname will appear on the 3M™Attest™
Auto‑reader490 Web App Statuspage.
Enable DHCP Default: setting is checked indicating the Web App will use the Dynamic IP address automatically assigned when the 3M™Attest™ Auto‑reader490 is
connected to the network. Remove the check if you wish to use a Static IP address assigned by your facilityIT.
IP Address Enter Static IP address assigned by IT
Gateway Enter Gateway
Subnet Mask Enter Subnet Mask
Primary DNS Enter Primary DNS
Use Computer Time Check this box if you wish to set the clock on‑board the 3M™Attest™ Auto‑reader490 using the computer’sclock.
Attest Auto‑reader
490 Time
Alternatively, leave the Use Computer Time box unchecked and complete the date and time boxes to set the 3M™Attest™ Auto‑reader490clock.
After changing desired settings, click on Save Config button to save your changes. A new screen confirming the settings were successfully changedappears.
 previous next