If Your Machine Does Not Operate As You Want
69
3
Screen
You do not have the
privileges to use
this function.
The use of this function is re-
stricted to authenticated users
only.
Contact the administrator.
Authentication has
failed.
The entered login user name
or login password is not cor-
rect.
Inquire the user administrator
for the correct login user name
and login password.
The machine cannot perform
authentication.
Contact the administrator.
Selected files con-
tain file(s) that
the user does not
have access privi-
leges to. Please
note that only the
files with access
privileges will be
deleted.
You have tried to delete files
without the authority to do so.
Files can be deleted by the file
creator or file administrator.
To delete a file which you are
not authorized to delete, con-
tact the file creator.
“
Updating the desti-
nation list...Please
wait.Specified des-
tination(s) or send-
er's name has been
cleared.
” appears, and
operations are not possible.
The destination list is being
updated from the network us-
ing SmartDeviceMonitor for
Admin. Depending on the
number of destinations to be
updated, there may be some
delay before you can resume
operation. Operations are not
possible while this message is
displayed.
Wait until the message disap-
pears. Do not switch off the
power while this message is
displayed.
Problem Cause Action
The screen is off. The screen contrast knob is
turned to the dark position.
Turn the screen contrast knob
until you can see the screen.
The machine is in Energy Sav-
er mode.
Press the {
{{
{Clear Modes/Energy
Saver}
}}
} key to cancel Energy
Saver mode.
The operation switch is turned
off. (The Auto Off function
has turned the machine off.)
Turn on the operation switch.
You can change the Auto Off
time. See “Auto Off Timer”,
General Settings Guide.
Cannot select the functions on
the screen.
Selected functions cannot be
used together.
See p.97 “Combination
Chart”.
There is no paper roll dis-
played in the paper roll tray.
The paper volume setting is
not properly set.
Load paper into the tray prop-
erly. See
General Settings Guide
.
The power does not come on. The main power switch is
turned off.
Turn on the Main power switch.
See General Settings Guide.
Message Problem/Causes Solutions
DolphinC2_ENcopy_F_FM.book Page 69 Friday, February 25, 2005 10:46 AM
