Copier Functions
29
2
Selecting Copy Paper
Preparation
There are two ways to select copy
paper:
❖
❖❖
❖ Auto Paper Select
The machine detects the origi-
nal's size, and then automatical-
ly selects a suitable copy paper
size based on the magnification.
❖
❖❖
❖ Manual Paper Select
Select the paper roll tray, cut pa-
per tray, or paper bypass con-
taining the paper you want to
copy onto.
Note
❒ In Auto Paper Select mode, insert
the proper size paper in the paper
bypass or select the magnification
ratio for the paper currently load-
ed in the paper tray, and then set
your original again.
Reference
p.25 “Copying from the Paper By-
pass”
Related default settings:
p.83 “Auto Paper Select Priority”
Auto paper select
A
AA
A
Make sure [Auto Paper Select] is se-
lected.
Note
❒ When Auto Paper Select is not
selected, press [Auto Paper Se-
lect].
❖
❖❖
❖ When the lower tray (paper roll
tray) is installed
❖
❖❖
❖ When the cut paper trays are
installed
Note
❒ Only the paper trays set to [No
Display] or [Recycled Paper] in Pa-
per Type and also set to [Yes] in
Apply Auto Paper Select can be
selected for the Auto Paper Se-
lect function. See “Paper Type”
in “Tray Paper Settings”, Gener-
al Settings Guide.
DolphinC2_ENcopy_F_FM.book Page 29 Friday, February 25, 2005 10:46 AM
