Copying
22
2
E
EE
E
Enter the number of copies using
the number keys.
Note
❒ The copy quantity is from 1 to
99.
F
FF
F
Place the originals.
Originals feed into the machine,
which then starts copying.
Reference
p.15 “Placing Originals”
Note
❒ When [Press Start Key] is select-
ed in the Feed Start Method,
copying starts when you press
the {
{{
{Start}
}}
} key. See “Feed Start
Method”, General Settings
Guide”.
❒ To stop originals feeding in,
press the {
{{
{Scanner Stop}
}}
} key. See
p.16 “To stop originals feeding
in”.
❒ Insert the original so that the
right edge is aligned with the
original guide.
❒ The continuous copy speed may
be slow down to ensure the ton-
er fuses to paper in the follow-
ing cases:
• When the machine is just
turned on
• When the temperature is low
• When making a lot of contin-
ues copies (more than 30
sheets/A0, E)
Important
❒
When Basic Authentication, Win-
dows
Authentication, or LDAP
Authentication is set, always
log off when you have finished
using the machine to prevent
unauthorized users from using
the machine.
-
--
- To stop the machine during a
multi-copy run
Press the {
{{
{Clear/Stop}
}}
} key after the
originals have fed in. The machine
stops when the current copy finishes.
Press [Stop] to cancel the copy job;
press [Continue] to resume the inter-
rupted copy job.
Original Counter/Reset
The number of scanned originals is
displayed in the screen's top right cor-
ner. This allows you to check the
number of originals in a job, or if any
sheets have been fed together, and the
number of copies that will be stored
in the copy output tray.
Resetting the original counter
A
AA
A
Press [Orig.] and the counter num-
ber in the screen's top right cor-
ner.
The number is reset to 0.
DolphinC2_ENcopy_F_FM.book Page 22 Friday, February 25, 2005 10:46 AM
