Yamaha MOXF6 Musical Toy Instrument User Manual


 
PERF SONG PATTERN MIX MASTER REMOTE UTILITY
QUICK SET
FILEVOICE
MOXF6/MOXF8 Reference Manual
Song Mode
Song Play
[F1] PLAY
[F2] GROOVE
[F3] TRACK
[F6] CHAIN
Song Record
Song Record Standby
[F1] SETUP
[F2] VOICE
[F3] ARP ED
[F5] CLICK
[F6] ALL TR
During Song Recording
[F1] SETUP
[F3] REST
[F4] TIE
[F5] DELETE
[F6] BAK DEL
Arpeggio Edit
[F1] COMMON
[F2] TYPE
[F3] MAIN
[F4] LIMIT
[F5] PLAY FX
[F6] OUT CH
Song Edit
[F1] CHANGE
[F2] VIEW FLT
[F4] TR SEL
[F5] INSERT
[F6] DELETE
Song Job
[F1] UNDO/REDO
[F2] NOTE
[F3] EVENT
[F4] MEAS
[F5] TRACK
[F6] SONG
Supplementary Information
97
Supplementary Information
Song Playback Types
To start playback of the Song from midway through the Song, set the desired location by using the controls below, then
press the [ ] (Play) button. These operations can also be executed during playback.
When the Song does not play back properly:
Keep in mind that starting a Song from somewhere in the middle may cause playback problems, such as the wrong
sound, incorrect pitch or unexpected volume changes. This may occur because the MIDI events recorded at the start
the Song have not been recognized by the tone generator section, since playback has started at a different point in the
Song, with different MIDI events. To prevent this from happening, set the “SongEventChase” parameter (page 144) to
“PC+PB+Ctrl” or “all” in the OTHER display of the Utility mode. With this setting, the Song will be played back properly
even when starting playback from the middle of the Song.
Assigning specific measure numbers to Locations 1 and 2
To assign specific measure numbers to locations 1 and 2,
select the desired measure number then press the [ ]/
[ ] (Rewind/Forward) while holding the [REC/SET
LOCATE]. The setting here will be shown at the top of the [F1]
PLAY display in the Song mode.
You can assign five different “snapshots” of important Song-related parameters such as transpose, tempo, Track mute
status, and the basic Song Mixing setup to the [SF1] – [SF6] buttons as Song Scenes. One of the convenient
advantages of Song. Scene is that it lets you instantly and automatically execute parameter settings that normally
require many button presses or controller operations. Use it during Song recording or playback to make instantaneous
setting changes.
Song Scene parameters
Playback from the middle of the Song
Forward Press the [ ] (Forward) button.
Fast forward Hold the [ ] (Forward) button.
Rewind Press the [ ] (Rewind) button.
Fast Rewind Hold the [ ] (Rewind) button.
Move to the top of the Song Press the [ ] (Top) button.
Move to location 1 While holding the [ ] (Top) button, press the [ ] (Rewind) button.
Move to location 2 While holding the [ ] (Top) button, press the [ ] (Forward) button.
Assigning various settings related to Song playback (Song Scene)
Tempo Song Mode PLAY display (page 76)
Transpose
Play Effect settings for 16 Tracks GROOVE display (page 77)
Track Mute settings for 16 Tracks [MUTE] (See the “Quick Guide” of the Owner’s Manual)
Pan settings for 16 Mixing Parts Mixing mode OUTPUT display (page 118)
Volume settings for 16 Mixing Parts
Reverb Send settings for 16 Mixing Parts
Chorus Send settings for 16 Mixing Parts
Cutoff Frequency settings for 16 Mixing Parts TONE display (page 118)
Resonance settings for 16 Mixing Parts
AEG Attack settings for 16 Mixing Parts
AEG Release settings for 16 Mixing Parts
Location 1 Location 2