Filter
Top Products
User’s Manual 3-25
Hardware, Utilities and Options
8. PORTEGE R600: Seat the memory module cover in place and secure it
with two screws.
PORTEGE A600: Seat the memory module cover in place and secure it
with one screw.
Figure 3-12 Seating the memory module cover
(PORTÉGÉ R600)
Figure 3-13 Seating the memory module cover
(PORTÉGÉ A600)
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, if required.
10.Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized
- to confirmed it, Start -> Control Panel -> System and Maintenance
-> System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
the Turning off the power section in Chapter 1, Getting Started if
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
Take care to ensure that the memory module cover is firmly closed.
Screws
Memory
module cover
Screw
Memory
module cover