Filter
Top Products
Harness Buckle Removal and
Installation
(continued)
Removing harness buckle:
1. Make sure restraint is securely locked in its
unfolded position.
(See page 10, unfolding restraint).
2. Unbuckle harness.
3. Push harness buckle strap
down 2 inches into
rear-facing belt path
tunnel.
4. Position metal buckle
strap retainer so that it is
vertical. (Fig. 2)
5. Guide buckle strap and
metal retainer upward
and rotate it slightly to fit
through slot in restraint
bottom.
(see Fig. 1 on page 35)
+ IMPORTANT:
For larger hands or if buckle is in position closest to
child, partially fold the restraint to access the metal
retainer through bottom of restraint. (Fig. 3)
36