Filter
Top Products
Properly Securing Child
WARNING:
Serious injury or death can result if child is not
properly secured in restraint.
Confirm harness is snug* before each use and after
making any restraint adjustments.
1. Confirm proper restraint installation
2. To loosen harness: lift
harness adjuster and pull
shoulder straps forward
(Fig. 1)
3. Unfasten harness clip
and harness buckle, and
move harness straps to
the sides.
4. Place child in restraint.
5. Position harness straps around child and fasten
buckle and harness clip. (Figs. 2 & 3)
Confirm harness clip and buckle are properly fastened
by gently tugging on each.
6. Gently pull harness straps upward to snugly fit
lap portion of harness which should fit low on
childs body, across the hips.
7. Slowly pull adjuster strap
downward to tighten
harness for a comfortable
and snug fit around child.
(Fig. 4)
* A snug harness strap
should not allow any
slack. It lies in a relatively
straight line without
sagging. It does not press on the childs flesh or
push the childs body into an unnatural position.
32