Filter
Top Products
Cleaning and Maintenance
(continued)
Cleaning the plastic shell:
Clean with damp cloth only: wet cloth with warm
water and mild soap and wring thoroughly so
it is NOT dripping water.
Towel dry.
Do NOT: use solvents or abrasive cleaners.
Washing the cover:
Hand wash only.
Line dry to prevent shrinking.
Do NOT: bleach, machine wash or machine dry.
(See page 38 for cover removal and replacement)
Cleaning the harness:
Do NOT remove or disassemble harness.
Clean with damp cloth only: wet cloth with warm
water and mild soap and wring thoroughly so
it is NOT dripping water.
Towel dry.
Do NOT: use solvents or abrasive cleaners.
Cleaning harness adjuster:
Periodically inspect harness adjuster for cleanliness
and proper functioning: When lifted, harness adjuster
should spring back immediately.
Use a soft bristle brush to remove loose debris
or clean more thoroughly if necessary.
Clean with damp cloth only: wet cloth with warm
water and wring cloth thoroughly so it is NOT
dripping water.
Towel dry.
Do NOT: use solvents or abrasive cleaners.
Do NOT attempt to disassemble the harness or
unthread adjuster mechanism
40