Filter
Top Products
8
4. Have a second person hold the console assem-
bly near the Uprights (91, 92).
Connect the Upright Wire (93) to the Console
Wire (88). See the inset drawing. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER. Remove the wire tie from the
Upright Wire. Insert the connectors down into
the Right Upright (92).
88
Console
Assembly
4
92
93
91
88
Wire
Tie
93
3. With the help of a second person, lower the
treadmill off the cardboard stand. The stand will
be used again in assembly step 9.
Identify the Right Upright Sleeve (90) and the
L
eft Upright Sleeve (89), which are labeled
“Right” and “Left.”
Slide the Right Upright Sleeve (90) onto the
Right Upright (92), and slide the Left Upright
Sleeve (89) onto the Left Upright (91).
89
“Right”
Cardboard
Stand
“Left”
9
0
3
92
9
1