Filter
Top Products
10
8. Raise the Frame (67) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (87) so that the large
barrel and the latch knob are in the positions
shown.
Remove the tie from the upper end of the
Storage Latch (87). Attach the upper end of the
Storage Latch to the bracket on the Frame (67)
with a 3/8" x 1 3/4" Bolt (3) and a 3/8" Jam Nut
(7).
Remove the tie from the lower end of the
Storage Latch (87). Keep the holes in the latch
cap aligned with the holes in the Storage Latch.
Make sure to keep the latch cap inside the
Storage Latch. Attach the Storage Latch to the
bracket on the Base (103) with a 3/8" x 2" Bolt
(4) and a 3/8" Jam Nut (7). Note: It may be nec-
essary to move the Frame (67) back and forth
slightly to align the Storage Latch with the
bracket.
Lower the Frame (67) (see HOW TO LOWER
THE TREADMILL FOR USE on page 27).
7
7
Large
Barrel
103
4
67
3
87
8
Latch
Knob
Latch
Cap
7. Slide the Right Upright Sleeve (90) up against
the console assembly. Attach the Right Upright
Sleeve with two #8 x 3/4" Tek Screws (24).
Attach the Left Upright Sleeve (not shown) to
t
he console assembly in the same way.
2
4
90
24
7
Console
Assembly