Filter
Top Products
En
7
Connections
! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Refer to the operating instructions for the component to be connected.
! Connect the power cord after all the connections between devices have been completed.
! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.
Descriptions of terminals
1
4523
1 CONTROL terminal
This is used to interconnect DJ players with a monaural mini phone
plug (Ø 3.5 mm) cable (commercially available) to send control
signals for relay playback.
= Connections for relay play (p. 10 )
2 AC IN
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use the included power cord.
3 AUDIO OUT L/R terminals
Connect the audio cables (included) here.
4 LINK terminal
Connect the LAN cable (included) here.
5 USB port
Connect to a computer.
Basic style
Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
! For rekordbox operations, see the rekordbox (Mac/Windows) user’s manual. You can see the rekordbox (Mac/Windows) user’s manual from [Help]
menu of rekordbox (Mac/Windows).
! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK
connections.
! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or
greater. Some switching hubs may not operate properly.
! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.
! Use the wireless router (available in the market) and access point (available in the market) which can obtain a sufficient communication speed
such as IEEE802.11n, IEEE802.11g etc. Depending on the signal conditions in the usage environment or the wireless router and access point, PRO
DJ LINK connections may not operate properly.
Connecting to a mixer with only one LAN port
When connecting to a mixer with only one LAN port using a switching hub, for optimum usage of rekordbox’s music file management functions, set
the channel number of the mixer to which the audio cable is connected and the player number displayed at the bottom left of the main unit display
section to the same number.
(Ex.: When the audio cable is connected to channel 1)
Audio cable
L
R
PHONO
CH 1
CD/LINE
N
AL GND
PLAYER
1
CH 1
Connections