Filter
Top Products
Using loop move
The playback position of the loop can be moved according to the length
of the selected beat.
1 Set the loop.
2 Touch [PERFORM] during the loop playback.
3 Select the length of the beat and touch.
The loop playback position is moved according to the length of the
selected beat.
! If the track’s BPM cannot be detected, the BPM is set to 130.
! When the quantize function is on, the sound is matched to the beat,
so there may be a slight delay in the function’s operation.
Using the slip mode
When the slip mode is turned on, normal playback in the original rhythm
continues in the background while pausing (in the vinyl mode), scratch-
ing, playing loops or playing in reverse. When the slip mode is canceled,
normal playback resumes from the point reached at the time the slip
mode was canceled.
! When the quantize function is on, there may be a slight delay in
operation of this function in order to synchronize the beat.
(slip beat loop, slip reverse, slip hot cue, slip beat jump, slip loop
move only)
Screen display in slip mode
! When in slip mode, [SLIP] on the screen bottom left lights up in blue.
Slip pausing
1 Press the [JOG MODE VINYL] button.
Set the jog mode to VINYL.
= Switching the jog dial mode (p. 18 )
2 Touch [SLIP].
The mode switches to the slip mode.
3 During playback, press the [PLAY/PAUSE f] button.
Normal playback continues in the background even while in the pause
mode.
4 Press the [PLAY/PAUSE f] button to cancel the
pause mode.
! When the slip pause mode is canceled, normal playback of the
sound that was playing in the background resumes. At this time, the
value adjusted with the [VINYL SPEED ADJUST TOUCH/RELEASE]
control is disabled and playback starts at the normal speed.
Slip scratching
1 Press the [JOG MODE VINYL] button.
Set the jog mode to VINYL.
= Switching the jog dial mode (p. 18 )
2 Touch [SLIP].
The mode switches to the slip mode.
3 During playback, press the top of the jog dial.
The scratch play mode is set.
Normal playback continues in the background even while scratching.
4 Release your hand from the top of the jog dial.
Normal playback of the sound that was playing in the background
resumes.
Slip looping
1 Touch [SLIP].
The mode switches to the slip mode.
2 Press the [IN/4BEAT (IN ADJUST)] button, then press
the [OUT (OUT ADJUST)] button.
Loop playback starts.
Normal playback continues in the background even during loop
playback.
! Loops of over 8 seconds cannot be set.
! The same operation is performed when the [IN/4BEAT (IN ADJUST)]
button is pressed for over 1 second and a loop is set.
3 Press the [RELOOP/EXIT] button.
Looping is canceled, and normal playback of the sound that was playing
in the background resumes.
Slip loop move
Touching the length of the beat during the slip loop activates the slip
loop move mode.
1 Touch [SLIP].
The mode switches to the slip mode.
2 Touch [PERFORM].
3 Select and continue to touch and hold the length of
the beat during the slip loop playback.
The loop starts moving.
Normal playback continues in the background even when the slip loop
move mode.
! Depending on the length of the loop, the loop move may not be
enabled.
4 Release your finger.
This cancels the slip loop move and returns to the slip loop playback
before playing back the slip loop move.
Slip reverse
1 Touch [SLIP].
The mode switches to the slip mode.
2 During playback, press the [DIRECTION REV] button.
The button lights and reverse playback starts.
Normal playback continues in the background even during reverse
playback.
!
Slip reverse play is automatically cancelled after 8 beats have
elapsed from the position at which the [DIRECTION REV] button was
pressed. Normal playback of the music playing in the background
resumes.
! If [DIRECTION REV] button is pressed again before 8 beats have
elapsed, the slip reverse play is cancelled and the normal playback of
the sound that was playing in the background resumes.
En
22