Filter
Top Products
Heating (up to 37°C)
Heating baby bottles
1 Using the measuring cup (11), pour 20 ml of water into the water
reservoir (5).
2 Remove the lid (1) from the cover (13) and place the cover on the base
(10).
3 Place the bottle on the protective grid (4) in the base (10).
4 Look up the desired setting in the Temperatures overview on page 6.
The setting depends on the amount of milk in the bottle and the current
bottle temperature.
5 Press and turn the Control knob (7) to the desired setting.
> The indicator LED (9) will light up red and you will hear a beep to
indicate that heating has started.
> Heating will take up to about 5 minutes, depending on the quantity and
temperature of the milk.
> When the milk has reached the right temperature, you will hear
three beeps.The indicator LED (9) will flash three times and turn green.
6 Remove the bottle from the base and unplug the mains cable.
Note:Always check that the contents of the bottle are at the correct
temperature by testing some of the back on your hand.
Heating jars of baby food
1 Using the measuring cup (11), pour 20 ml of water into the water
reservoir (5).
2 Place the jar (max 150 grams) on the protective grid (4) in the base (10).
3 Place the cover (13) on the base (10).
4 Press and turn the Control knob (7) to .
> The indicator LED will light up red and you will hear a beep to indicate
that heating has started.
> Heating will take about 5 minutes, depending on the quantity, type, and
temperature of the food.
> When the food has reached the right temperature, you will hear
three beeps.The indicator LED (9) will flash three times and turn green.
5 Remove the cover from the base, remove the jar, and unplug the mains
cable.
ENGLISH 7
15
20
30
25
15
20
30
25
SBC_SC280.qxd 13-07-2004 10:37 Pagina 7