Filter
Top Products
Notes:
– Do not lift the cover (13) during heating.
– To distribute the heat better, stir the contents of the jar after heating it.
– Always check that the contents of the jar are at the correct temperature by
testing some on the back of your hand.
Keeping bottles and jars warm
You can also use the 3-in-1 Steaming Centre to keep bottles and jars warm
for a short time.After heating it up, simply place the bottle or jar on the
protective grid (4) in the base (10) and place the cover (13) on the base.
The cover will retain the heat and keep the bottle or jar warm for a time.
For microbiological and hygienic reasons, baby food should never be kept
warm for longer than one hour.
Sterilizing
With the container (3), you can use the 3-in-1 Steaming Centre to sterilize
bottles and small objects like rubber teats and small toys.The Steaming
Centre disinfects the objects completely by destroying all harmful bacteria.
Notes:
– This sterilizer does not sterilize up to clinical standards.
– Before sterilizing, bottles and objects should first be cleaned.
1 Using the measuring cup (11), pour 50 ml of water into the water
reservoir (5).
2 Place the container (3) on the base (10).
3 Place the bottles in the container (upside down).
The container can contain four wide-neck bottles or six regular-sized
bottles. Click the bottles into the projections at the bottom of the container.
4 Place small objects in the basket (2) and place the basket in the container.
5 Place the lid (1) on the container.
6 Press and turn the Control knob (7) to .
> The indicator LED will light up red and you will hear a beep to indicate
that sterilizing has started.
> After about 15 minutes you will hear three beeps.The indicator LED (9)
will flash three times and then turn green. Sterilizing has now finished.
7 Remove the bottles or objects from the container and unplug the mains
cable.
ENGLISH8
4 x 6 x
15
20
30
25
SBC_SC280.qxd 13-07-2004 10:37 Pagina 8