Filter
Top Products
B)Bottle heater
10 Base with heating element
Heats up the water.
12 Handle
13 Cover
14 Lid
C)Food steamer
10 Base with heating element
Heats up the water.
15 Handle
16 Steaming bowl
Installation
1 Before connecting the Philips 3-in-1 Steaming Centre to the mains, check
that the mains supply is 220-240V AC.
2 Place the Steaming Centre out of reach of children and on a dry, non-slip,
horizontal surface.
3 Unreel the required length of cable from the cable holder (8) and plug
the appliance into the mains.
> The indicator LED (9) will light up green.The Steaming Centre is now in
Standby mode but is not actually heating. Heating is only activated when
the Control knob (7) is pressed and the desired heating function is
selected.
Operation
Temperatures overview
Babies usually like their milk and food to be at a temperature of 37ºC.
The Control knob (7) enables you to set the correct food temperature.
The setting depends on the amount, consistency, and current temperature
of the milk or food.
- refrigerator temperature (approx.
10 °C.)
- room temperature (approx. 20 °C.)
- up to 200 ml. bottle content
- up to 50 ml. bottle content
Note: If all the water evaporates before
heating is completed, the 3-in-1
Steaming Centre will start to beep
and the indicator LED (9) will start
flashing red. If this happens, press
the Control knob (7) to interrupt the
heating process and fill the water
reservoir (5).
ENGLISH6
Heating
Sterilizing
Steaming
20ºC/10ºC 20 ml
20ºC 20 ml
20ºC 20 ml
10ºC 20 ml
10ºC 20 ml
50 ml
200 ml
•
15
•
20
•
25
•
30
SBC_SC280.qxd 13-07-2004 10:37 Pagina 6