Peg-Perego Base Fissa Car Seat User Manual


 
ECE R44/03, for children weighing from 0 - 13 kg
(0 - 12/14 months of age). Suitable for general use
in vehicles. Designed for use with most--but not
all--vehicle seats.
The child safety car seat can be correctly installed
if the user's manual for the vehicle states that the
vehicle conforms to the "Universal" requirements for
Group 0+ child car seats.
The "Primo Viaggio" car seat has been classified
"Universal" according to stricter inspection criteria
than the criteria used for previous models that do
not carry a safety inspection label.
The child safety car seat may be used only on
approved vehicles that are equipped with three-
point stationary or wrap-around belts that have
been inspected in conformity with the UN/ECE
Regulation No. 16 or equivalent regulations.
When in doubt, consult the "Primo Viaggio" car seat
manufacturer or retailer.
Make sure that the three-point safety belt on the
vehicle, which is used to fasten the base and the
child car seat to the vehicle, is always taut and never
twisted.
In the case of accidents where the child car seat
and the three-point safety belt on the vehicle
are subjected to extreme stress, we recommend
replacing the child car seat and the three-point
safety belt with new ones.
Adjust the child car seat safety belt, making sure
that the strap between the legs is taut, and that it
fits snuggly against the child's body without being
too tight.
Rigorously follow all instructions supplied by the
child restraint system manufacturer.
Be especially careful not to position baggage in the
car in such a way that it may cause injury to the
child in the car seat in case of accident.
Never use the car seat without its cloth lining. Do
not replace the lining with another lining that has
not been approved by the manufacturer. The lining
is an important part of the car seat.
HOW TO INTERPRET THE INSPECTION LABEL
This paragraph explains how to interpret the
inspection label (orange label).
The manufacturer's trademark and the name of the
product are shown at the top of the label.
The word "UNIVERSAL" indicates that the child safety
car seat can be used on approved vehicles equipped
with three-point stationary or wrap-around belts
which have been inspected in conformity with UN/
ECE Regulation No. 16 or equivalent regulations.
The letter "E" inside a circle is a European inspection
label. The number indicates the country that
approved inspection. (1 - Germany, 2 - France, 3
- Italy, 4 - The Netherlands, 11 - Great Britain, and
13 - Luxembourg).
The certification number is listed below. Numbers
beginning with 03 pertain to the third amendment
of Law R44.
Each car seat is personalized with a progressive
production number upon inspection. Each child car
seat can be identified by its inspection number.
The last line states the safety regulation number:
ECE R44/03.