Peg-Perego Base Fissa Car Seat User Manual


 
the child car seat.
22• Insert the belt into the slit behind the backrest, as
shown in the figure.
23• Check to make sure that the belt is taut and
fastened securely, for the child!s safety.
To remove the child car seat from the car, remove
the car safety belt from the back of the seat, turn
the regulator handle back towards the upright
position until it clicks, and lift the child car seat
off its base. Leave the base attached to the car
seat, ready for use.
CLEANING & MAINTENANCE
Your product requires only minimal maintenance.
Cleaning and maintenance operations must be
performed only by adults.
Be sure to keep all moving parts clean, lubricating
them with light oil if necessary.
Regularly clean the plastic parts with a damp cloth.
Do not use solvents or similar products.
Brush the fabric parts to remove dust.
Do not use solvents or similar products to clean the
polystyrene bumper.
Protect the product against smog, water, rain and
snow. Continued and extended exposure to sunlight
can change the colours of many materials.
Store the product in a dry area.
WARNING
IMPORTANT WARNING: IT IS FORBIDDEN TO MOUNT
THE CHILD CAR SEAT ON A SEAT WITH AN AIR BAG
SYSTEM INSTALLED.
THIS GROUP 0+ CHILD SAFETY CAR SEAT MUST
ALWAYS BE INSTALLED FACING BACKWARDS IN
RELATION TO THE DIRECTION THE CAR TRAVELS.
ALWAYS USE THE CHILD CAR SEAT SAFETY BELTS,
AND CHECK TO MAKE SURE THAT THE CHILD DOES
NOT UNLATCH THE BELT BY HIMSELF.
THIS PRODUCT WAS NOT DESIGNED FOR CHILDREN
TO SLEEP IN.
TO AVOID DANGER OF THE CHILD'S FALLING OUT OF
THE CAR SEAT, THE SAFETY BELT MUST ALWAYS BE
USED TO FASTEN THE CHILD IN THE SEAT.
WHEN ATTACHING THE BASE AND THE CHILD CAR
SEAT, PASS THE THREE-POINT CAR SEAT BELT
THROUGH THE SPECIAL SLITS.
THIS CAR SEAT MAY BE MOUNTED ON THE CAR
USING ONLY THREE-POINT SAFETY BELTS. IT IS
FORBIDDEN TO USE TWO-POINT OR ABDOMINAL
BELTS TO FASTEN THE CHILD CAR SEAT (see the
Safety Regulations).
NEVER REMOVE THE CHILD FROM THE SAFETY CAR
SEAT WHILE THE CAR IS MOVING.
NEVER LEAVE YOUR CHILD ALONE IN THE CAR.
NEVER LEAVE THE SAFETY CAR SEAT IN A CAR
DIRECTLY EXPOSED TO THE SUN. BEFORE PLACING
YOUR CHILD IN THE CAR SEAT, CHECK TO MAKE
SURE THAT THE SEAT IS NOT HOT.
NEVER PLACE THE SAFETY CAR SEAT ON HIGH
SURFACES (tables or shelves), SOFT SURFACES (beds
or sofas), OR ON SLOPING SURFACES.
THE USE OF THE SAFETY CAR SEAT BY PREMATURE
NEWBORN INFANTS MAY CAUSE RESPIRATION
PROBLEMS FOR THE CHILD. CONSULT A PHYSICIAN
ABOUT THIS BEFORE LEAVING THE HOSPITAL.
MOUNTING AND/OR ASSEMBLY OF THE CHILD CAR
SEAT SHOULD BE DONE ONLY BY ADULTS.
DO NOT USE ACCESSORIES THAT HAVE NOT BEEN
APPROVED BY THE MANUFACTURER OR BY A
COMPETENT AUTHORITY.
NEVER INSERT FINGERS INTO THE CHILD CAR SEAT
MECHANISMS.
DO NOT MODIFY THE CHILD CAR SEAT. DO NOT
USE THE CHILD CAR SEAT IF IT IS BROKEN OR IF
PIECES ARE MISSING.
CONTACT THE AFTER-SALES DEPARTMENT FOR ANY
NECESSARY REPAIR TO THE CHILD CAR SEAT, TO
OBTAIN SPARE PARTS, OR FOR INFORMATION ABOUT
THE PRODUCT. THE LAST PAGE OF THIS MANUAL
LISTS THE NECESSARY INFORMATION REGARDING
REPAIR AND SPARE PARTS SUPPLY.
DO NOT USE SECOND-HAND CHILD CAR
SEATS. SECOND-HAND PRODUCTS MIGHT HAVE
UNDERGONE SERIOUS STRUCTURAL DAMAGE.
DO NOT USE THE CHILD CAR SEAT FOR CHILDREN
BORN MORE THAN FIVE YEARS AFTER THE DATE
PRINTED ON THE SEAT. THE SEAT MIGHT NO
LONGER BE IN CONFORMITY WITH CURRENT SAFETY
REGULATIONS.
DO NOT REMOVE THE ADHESIVE AND SEWN-ON
LABELS FROM THE CAR SEAT. SAFETY REGULATIONS
REQUIRE THESE LABELS, AND REMOVING THEM
MAY CAUSE THE CAR SEAT TO NO LONGER BE IN
CONFORMITY WITH SAFETY REGULATIONS.
SAFETY REGULATIONS
Group 0+ child safety car seat. "Universal" category,
inspected in conformity with European Regulation