Filter
Top Products
Appendix C Generating 2167A Documents Using FrameMaker
DocumentIt User Guide C-4 ni.com
Generating the 2167A Document
To generate the sample 2167A document using DocumentIt and
FrameMaker, complete the following steps:
Note If you want to generate a document from your own model, follow the same steps
given in this example, but use your own model for document generation.
1. Create a directory in which you want the output document to reside.
2. Copy all files from:
(UNIX) $CASE/DIT/templates/fmaker/general
(Windows) %CASE%\DIT\templates\fmaker\general
to the document directory.
3. From the Catalog Browser File menu, select Load.
4. Browse through the document directory and double-click to load the
file
Controller_Logic_mil.dat.
5. In the Catalog pane of the Catalog Browser, select the top-level
SuperBlock—in this case, Controller_Logic.
6. From the Catalog Browser, select Tools»DocumentIt. The Generate
Documentation dialog appears.
7. In the File Name field, enter
Controller_Logic_mil.mml.
Note An ASCII file with MML markup commands must have a file extension of .mml in
order to be formatted by FrameMaker.
8. With the Block Parameters combo box, select %Vars from Xmath.
9. In the Template File field, specify
fmgp.tpl as the template file.
10. Click the Typecheck checkbox.
11. To generate the MML document file, click OK.
<TBLcap>
Table caption.
<TitlePar1>
Title page entries. Refer to Figure C-2.
<TitlePar2>
Title page CSCI name and system name entries. Refer to Figure C-2.
Table C-2. FrameMaker 2167A MML Commands (Continued)
Command Description