Filter
Top Products
Black plate (391,1)
NOTE
l
Because genuine leather is a natural
material, its surface is not uniform and it
may have natural scars, scratches, and
wrinkles.
l
To maintain the quality for as long as
possible, periodical maintenance, about
twice a year, is recommended.
l
Sand and dust on the seat surface may
damage the overcoat of the genuine leather
surfaces and accelerate wear.
l
Greasy soiling on genuine leather may
cause molding and stains.
l
Rubbing hard with a stiff brush or cloth
may cause damage.
l
Do not wipe the leather using alcohol,
chlorine bleach, or organic solvents such as
thinner, benzene, or gasoline. Otherwise, it
may cause discoloration or stains.
l
If the seats get wet, promptly remove
moisture with a dry cloth. Remaining
moisture on the surface may cause
deterioration such as hardening and
shrinkage.
l
Exposure to direct sunlight for long periods
may cause deterioration and shrinkage.
When parking the car underdirect sunlight
for long periods, shade the interior using
sunshades.
l
Do not leave vinyl products on the seats for
long periods as they may affect the leather
quality and coloring. If the cabin
temperature becomes hot, the vinyl may
deteriorate and adhere to the genuine
leather.
Fabric
Remove dust and loose dirt from fabric
with a whisk broom or vacu um cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
Panel
When the panel needs to be cleaned, use a
soft cloth to wipe off dirt from the surface.
NOTE
Scratches or nicks on the panels resulting from
the use of a hard brush or cloth may not be
repairable.
Be particularly careful when cleaning the
following areas which are installed with
specially coated panels.
· Piano black panel
í
· Decoration panel
í
qCleaning the Lap/Shoulder Belt
Webbing
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
Maintenance andCare
Appearance Care
8-61
í
Some models.
MX-5_8DG6-EA-13F_Edition1 Page391
Thursday, May 30 2013 10:52 AM
Form No.8DG6-EA-13F