Filter
Top Products
Black plate (375,1)
Reverse lights
Brake lights/Taillights
9. Install the new bulb in the reverse order
of the removal procedure.
High-mount brake light
Due to the complexity and difficulty of
the procedure, the LED bulbs must be
replaced by an Authorized Mazda Dealer.
NOTE
LED bulb replacement is not possible because
it is built into the unit. Replace the unit.
License plate lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the trunk.
3. Slide the light to the left side of the
vehicle and remove it.
4. Turn the socket and bulb assembly
counterclockwise and remove it.
5. Disconnect the bulb from the socket.
6. Install the new bulb in the reverse order
of the removal procedure.
Maintenance andCare
Owner Maintenance
8-45
MX-5_8DG6-EA-13F_Edition1 Page375
Thursday, May 30 2013 10:52 AM
Form No.8DG6-EA-13F