Filter
Top Products
3 - 12
• USB Host D-
• USB Host Detect
• Clear To Send
• Received Data
•GND
• RS-232 Shutdown
• USB Client D+
• USB Client D-
• USB Client +5V
Note: Signals referenced are for a DTE device.
Dolphin Peripherals/Accessories for the Dolphin 6500
The following items are sold separately and enhance your Dolphin 6500’s capabilities.
Dolphin HomeBase
™
Device
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base,
its main battery pack charges in an average of 5 1/2 hours for a fully depleted battery. It takes less time
if the battery has some charge.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page 10-1
Dolphin eBase
™
Device
The Dolphin eBase is used to charge the main battery, to power the battery charging system in the
terminal, and can be used to communicate data from the terminal to a PC/laptop via the Ethernet port.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Dolphin HomeBase/eBase Device on page 10-1
Dolphin QuadCharger
™
Device
The Dolphin QuadCharger device, a four-slot charging station for Dolphin Li-Ion battery packs, can
charge each battery in an average of 5 1/2 hours for a fully depleted battery. It takes less time if the
battery has some charge.
For more information, see Dolphin QuadCharger Device on page 11-1.
Dolphin 6500 Handle
The optional slide-on handle provides a productivity-enhancing solution for applications that require high
volume scanning.
For more information, see Dolphin 6500 Slide-On Handle on page 13-1.
USB Communication Cable for the Dolphin 6500
The USB Communication Cable for the 6500 is used when communicating between the terminal and a
PC/laptop via the USB port. The cup-style 6500-USB cable slides onto the bottom of the device lining up
with the connector. The cable unit includes an opening for the power cable. See page 8-1.