Filter
Top Products
3 - 2
Front Panel Features
Scan/Decode LED
The LED lights red when you press the Scan trigger in scanning applications.
The LED lights green when a scanned bar code is successfully decoded.
The LED lights red while the main battery is charging.
The LED lights green when the main battery charging is completed.
The LED lights blue or red during soft and hard resets.
The LED is user-programmable.
Keypad
28-key numeric keypad (alpha shifted) and 52-key full alphanumeric keypads are available.
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a 3.5” transflective active matrix, 65k color LCD display with a backlight, QVGA
(240 x 320 resolution); see Backlight on page 7-7. The touch panel is a 4-wire analog resistive
touch.
Dolphin 6500s ship with a screen protector already installed over the touch screen lens
to help prevent damage to the touch screen. Do NOT remove this screen protector before
initial use. Honeywell recommends using screen protectors, especially for applications
that require high volume interfacing with the touch screen. For more information, see
Using Screen Protectors on page 3-3. You can purchase additional screen protectors by
contacting your Honeywell sales representative.
Scan/Decode LED
Touch Screen
Display (screen
protector
installed at the
factory)
(28-key keypad (numeric)
Navigation Keys
Power Key
Software Reset Key
Scan/Decode LED
Touch Screen
Display (screen
protector
installed at the
factory)
Navigation Keys
(arrow keys)
Power Key
Software Reset Key
(52-key keypad (full alphanumeric)
!