Filter
Top Products
7
• Place the front curved base on a flat surface so that it curves
away from you.
• Place the back base on a flat surface, behind the front
curved base.
• Position the leg assemblies so that the hubs are facing
each other.
• Fit the ends of the legs over the ends of the front and back
bases, as shown.
Hint: You may need the help of another adult to help you balance
the assembly.
Front Curved Base
Hubs
Back Base
3
Swing Frame Assembly
HUBS FACING OUT
FRONT BASE CURVES INWARD
• Check to be sure you have assembled the leg assemblies to the
bases correctly. Please refer to the illustrations above.
• If the leg assemblies are assembled incorrectly to the bases,
pull the legs from the bases. Please re-read and repeat
assembly step 3.
FRONT BASE CURVES OUT
INCORRECT
4
HUBS FACE IN
CORRECT