Filter
Top Products
11
Seat Tube Hub
• Rotate the kickstand up.
• Push down on the seat bottom to be sure the kickstand is
in position.
• Grasp the handles on the seat.
• Slide the seat between the seat tubes.
• Fit the groove in each handle to the seat tubes.
Handles
Kickstand
Swing
1
Seat Tubes
Groove
• Now, lower the seat down onto the red seat tube hubs.
Hint: The seat tube hubs should fit into the red, indented area on
the seat handles.
• Push the seat down to be sure it is secure.
Seat Tube Hub
Indented Area in
Seat Handle
2
• Check to be sure the seat is secure on the seat tube hubs.
• Make sure you see the green indicator on the seat tubes.
• If you can see red on the seat tube indicator, the seat is not
secure on the hubs. Please remove the seat. Re-read and repeat
steps 1 and 2.
3
Green
Red