Filter
Top Products
6
• Fasten the pad buckles on the front edge of the pad and underneath
the seat. Make sure you hear a “snap” on both sides.
Pad Buckles
• Fasten the pad buckles around each side rail.
• Press the fasteners together in the seat back portion of the pad.
Pad Buckles
Side Rail
PRESS SEAT BACK
Infant Seat/Rocker Assembly
8
9
• From behind the assembly, insert the restraint straps through
the slots in the pad.
• Press to fasten the restraint strap assembly to the pad.
Restraint Strap Slots
10
PRESS
Button
Leg
Housing
• Place a housing on a flat surface.
• Insert the button end of a leg into the hole in the housing.
• Push the leg in until it “snaps” into the housing.
• Repeat this procedure to assemble the other leg to the
other housing.
• Pull the legs to be sure they are secure in the housings. If you
can remove them, you have not assembled them correctly.
Please re-read and repeat this assembly step.
Swing Frame Assembly
1
• Pull the other leg back until it “snaps” into place in the housing.
• Repeat this procedure to “snap” the leg in the other housing
into place.
Leg
2