Filter
Top Products
DANGER: HAZARDOUS AREA INSTALLATION
Emerson designs, manufactures, and tests its Rosemount Analytical products to meet many
national and international standards. Because these instruments are sophisticated technical prod-
u
cts, you must properly install, use, and maintain them to ensure they continue to operate within
their normal specifications. The following instructions must be adhered to and integrated into your
safety program when installing, using, and maintaining Rosemount Analytical products. Failure to
follow the proper instructions may cause any one of the following situations to occur: Loss of life;
personal injury; property damage; damage to this instrument; and warranty invalidation.
• Read all instructions prior to installing, operating, and servicing the product. If this Instruction
Manual is not the correct manual, telephone 1-800-854-8257 and the requested manual will
be provided. Save this Instruction Manual for future reference.
• If you do not understand any of the instructions, contact your Emerson representative for
clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation, and maintenance of
the product.
• Install your equipment as specified in the Installation Instructions of the appropriate
Instruction Manual and per applicable local and national codes. Connect all products to the
proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program, and
maintain the product.
• When replacement parts are required, ensure that qualified people use replacement parts
specified by Rosemount. Unauthorized parts and procedures can affect the product’s
performance and place the safe operation of your process at risk. Look alike substitutions may
result in fire, electrical hazards, or improper operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when
maintenance is being performed by qualified persons, to prevent electrical shock and personal
injury.
This sensor is not Intrinsically Safe. or Explosion Proof. Installations near flammable liquids or in haz-
ardous area locations must be carefully evaluated by qualified on site safety personnel.
To secure and maintain an intrinsically safe installation, an appropriate transmitter/safety barrier/sen-
sor combination must be used. The installation system must be in accordance with the governing
approval agency (FM, CSA or BASEEFA/CENELEC) hazardous area classification requirements. Consult
your analyzer/transmitter instruc tion manual for details.
Proper installation, operation and servicing of this sensor in a Hazardous Area Installation is entirely the
responsibility of the user.
CAUTION: SENSOR/PROCESS APPLICATION COMPATIBILITY
The wetted sensor materials may notbe compatible with process composition and operating condi-
tions. Application compat ibility is entirely the responsibility of the user.
Essential Instructions
Read this page before proceeding
Essential Instructions I