Filter
Top Products
114D-Link DIR-518L User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP Address
In Windows:
Click on Start > Run.
In the run box type cmd and click OK. (Windows® 7/Vista® users
type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some rewall software
programs may block a DHCP request on newly installed adapters.
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.