Filter
Top Products
15
Selecting An FX Bank
FX Banks allow you to select from a preset library of 20 different effect chains. Behind the scenes
the Mod FX, Delay, and Reverb are configured to create a specified combination of effects. You
can then further refine the sound by editing each effect’s settings. Note that changing between
different FX Banks does not change the Wah (Element XP only), Compressor, Amp/Distortion,
EQ, or Noise Gate settings, as these processing modules belong to the Tone Bank.
Available FX Banks
Display Number Description
1
Chorus
2
Flanger
3
Phaser
4
Pitch
5
Tremolo
6
Rotary
7
Envelope Filter
8
Digital Delay
9
Analog Delay
10
Tape Delay
Available FX Banks
Display Number Description
11
Hall Reverb
12
Spring Reverb
13
Chorus + Digital Delay
14
Chorus + Delay + Reverb
15
Flanger + Analog Delay
16
Phaser + Tape Delay
17
Digital Delay + Hall Reverb
18
Analog Delay + Spring
19
Pitch + Room Reverb
20
Vibrato + Tape Delay
To select an FX Bank:
1. Press the FX BANK button. The display will read cu for custom.
2. Turn the SELECT knob to select from one of the 20 FX Bank library defaults. The number of
the selected FX Bank will appear in the LED display as you turn the
SELECT knob.
3. When done, press either FOOTSWITCH to exit Edit Mode. Note that you must store the
changes if you wish to retain the settings. See "Storing/Copying Presets" on page 17 for
further information on storing presets.