Filter
Top Products
Memory Riser Board Replacement 7
Closing the Computer Cover
1 Check all cable connections, especially those that might have come
loose during your work. Fold cables out of the way so that they do not
obstruct the computer cover.
2 Ensure that no tools or extra parts (including screws) are left inside the
computer.
3 Close the computer cover by pivoting the cover down toward the back
of the chassis and into position. Ensure that the release latch clicks
into place (see the following figure).
Closing the Computer Cover
4
Stand the computer upright.
5 If you are using a padlock to secure your computer, install the padlock.
padlock ring
cover release latch
security cable slot