Filter
Top Products
16 Memory Riser Board Replacement
www.dell.com | support.dell.com
Installing a Memory Module
1 Press the securing clips at each end of the socket outward until they
snap open (see the following figure).
2 Align the slots on the bottom of the module with the ridges inside the
socket.
NOTICE: To avoid damage to the memory module, press the module straight
down into the socket with equal force applied at each end of the module.
3
Press the module straight down into the socket until the securing clips
snap into place at the ends of the module.
Installing a Memory Module
slots (2)
securing clips (2)
memory socket