Filter
Top Products
SLR • SLC • SLD OPERATOR INSTALLATION GUIDE
- 5 -
PAD MOUNTING INSTRUCTIONS FOR MODELS
SLR, SLC & SLD
Before installing, make sure the gate rolls or slides freely,
and that all exposed rollers are properly covered. The
gate must be covered with fabric with openings no larger
than 2 1/4” in size, to a minimum height of 48 inches
above ground level. On picket-style gates, if pickets are
spaced less than 2 1/4” apart, mesh is optional.
To assemble the drive chain and gate brackets, refer to
Page 6. Make sure that the chain sag does not exceed
recommended sizes and that the chain does not come
into contact with the moving parts of the gate or ground.
A SEPARATE PEDESTRIAN GATE IS REQUIRED
FOR ALL PEDESTRIAN TRAFFIC.
THIS GATE MUST BE A MINIMUM DISTANCE
OF SEVEN (7) FEET FROM THE
VEHICULAR GATE AND GATE OPERATOR.
8-04-5