Combi 8040 Car Seat User Manual


 
Installation with Lap Belt Only:
Refer to vehicle owner’s manual to identify the seating locations which can be used
with a car seat. Check for specific instructions for car seat use.
After selecting a seating location, if vehicle seat back is adjustable, adjust vehicle seat
back into most upright position.
Place car seat rear-facing on vehicle seat.
Thread vehicle lap belt through vehicle lap belt guides on car seat (fig. a) and buckle
vehicle belt. Be sure vehicle lap belt is not twisted.
31
4
Securing Infant Car Seat W
ithout Base:
Not all vehicle seat belts can be used with a car seat. Read vehicle owner’s manual and
“Vehicle Seat Belts” section in this manual.
WARNING
DEATH or SERIOUS INJURY can occur
1
2
3
(fig. a)
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 32