Filter
Top Products
23
Place base rear-facing in the vehicle seat location selected with blue lap belt guides
toward vehicle seat back and centered between the vehicle lower anchors (fig. d).
Attach car seat to base.
Adjust recline using recline indicator on the side of the car seat. Line of recline
indicator MUST be in green striped zone (fig. e). If line is not in green striped
zone, adjust base using recline foot (see “Base Adjustment” section), and recheck
recline of car seat. Repeat until recline indicator is in green striped zone.
If base can not be adjusted to locate the line in the green striped zone:
1. If necessary, place tightly rolled towel, pool noodle, or firm object
under recline foot to level car seat.
2. Try a different seating position.
3. Do not use this infant car seat.
NOTE: Vehicle must be parked on horizontal surface
during this installation.
Remove car seat from base.
7
8
(fig. d)
9
(fig. e)
Recline
Indicator
Green
Striped Zone
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 24