Filter
Top Products
25
Attach car seat to base.
Recheck recline of car seat. Adjust if necessary (see step 8).
Removal Of Base Installed With LATCH:
Loosen lower anchor belt:
- While pressing down in center of base to reduce tension on lower anchorage belt,
push adjuster release button and loosen belt.
Remove lower anchor connector:
- Press and hold the red release button.
- Pull the connector off the vehicle anchorage bar (fig. a).
Repeat to remove connector on opposite side.
(fig. a)
12
13
1
2
3
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 26