Filter
Top Products
22
If vehicle seat back is adjustable, adjust vehicle seat back into
most upright position.
Remove car seat from base.
Lift the LATCH lower anchor connectors out of the base (fig. a).
Lengthen lower anchor belt. While pressing adjuster release button,
pull belt to extend the length of lower anchor belt (fig. b).
Place lower anchor belt over side of base and into
belt slot in vehicle lap belt guide (fig. c).
Repeat for opposite side.
Check that the belts are not twisted.
3
4
5
7
2
(fig. a)
(fig. c)
(fig. b)
Vehicle Lap
Belt Slot
LATCH Lower
Anchor Connectors
Lower
Anchor
Belt
Adjuster
Release
Button
Pull
6
8040 (EN) 122904.qxd 12/29/04 9:17 PM Page 23