Filter
Top Products
FIGURE 2 Switch function in Access Gateway mode
Fabric OS features in Access Gateway mode
In the table below, "Yes" indicates that the feature is supported in Access Gateway mode. "No"
indicates that the feature is not provided in AG mode. "NA" indicates the feature is not applicable in
Access Gateway mode. A single asterisk (*) indicates the feature is transparent to AG; that is, AG
forwards the request to the Enterprise fabric. Two asterisks (**) indicates that the feature may not be
available if the Enterprise fabric is not a Brocade fabric. For more information on these features, refer to
the Fabric OS Administrator's Guide and Fabric OS Command Reference.
Fabric OS components supported on Access Gateway TABLE 1
Feature Support
Access Control Yes (limited roles)
Adaptive Networking Yes
1
When a switch is behaving as an AG, RBAC features in Fabric OS are available, but there are some limitations. For more information
on the limitations, refer to Access Gateway hardware considerations on page 26.
Fabric OS features in Access Gateway mode
Access Gateway Administrator's Guide 17
53-1003126-02