Filter
Top Products
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp
Using your BT Digital Baby Monitor 250 33
Crying alert options
Beep = Parent unit will beep,
Crying Alert will be displayed
and icon will flash.
Beep&Vibe = Parent unit will
beep and vibrate. Crying Alert
will be displayed and icon
will flash.
Vibrate = Parent unit will
vibrate only (no alert beep will
sound). Crying Alert will be
displayed and the icon
will flash.
Screen Only = Crying Alert
will be displayed and the
icon will flash.
The default setting is
Beep&Vibe.
The crying alert is a ‘user alert’
as described on page 34.
Crying alert
The crying alert will only be activated if Mute All
has been switched on (or if the Parent unit volume
has been switched to volume off), see page 20 for
information on the Mute All feature.
With Mute All switched on, if your baby starts to cry
you will not be able to hear the cries, but if the cries
sound above a certain level i.e. if they reach 83dBA,
which is the 1st red Baby sound level LED, then the
Parent unit will activate the crying alert. The default
crying alert type is for the Parent unit to vibrate and
emit an audible beep but you can select a different
alert type if you want to.
Select the type of crying alert
1. Press
. Nightlight is displayed, press
until SetUp is displayed and press
.
2. Crying Alert is displayed, press
.
3. Use the
and buttons to display either
Beep, Beep&Vibe, Vibrate or Screen Only
and press
to select. The display will show
Saved and you will hear a confirmation beep.
To stop an alert, press any button on the Parent unit.