Filter
Top Products
Operation48
System setup: Advanced menu
Auto Power
Off
(Disable)
This function allows the projector to turn off automatically if no input
signal is detected after a set period of time. Press Left/ Right on the
projector or remote control to set the duration before the projector is
turned off.
The time period can be set from 5 to 30 minutes in 5-minute increments.
If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time
period.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 38 for details.
Timer
Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Panel Key
Lock
(Disable)
Disables or enables all panel key functions except POWER on the
projector and buttons on the remote control. See "Locking control keys"
on page 38 for details.
Splash
Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-
up. Three options are available: BenQ logo, Black screen, or Blue screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Quick
Cooling
(On)
Enables or disables the Quick Cooling function. Selecting On enables the
function and projector cooling time will be shortened from a normal 90-
second duration to approximately 30 seconds.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas.
See "Hiding the image" on page 38 for details.
Audio
Settings
Mute (Off)
Toggles the projector audio between on and off.
Vo lum e (5)
Adjusts audio volume level.
Power on/off ring tone (On)
Toggles the ring tones during startup and after the cooling process finishes
between on and off.