Filter
Top Products
Operation 45
Display menu
FUNCTION
(default setting/
value)
DESCRIPTION (default setting/value)
Wall Color
(Off)
Correct the projected picture’s color when the projection surface is not
white.
Aspect Ratio
(Auto)
There are four options to set the image's aspect ratio depending on your
input signal source.
See "Selecting a picture mode" on page 33 for details.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone" on page
31 for details.
Position
(0)
Displays the position adjustment page. To move the projected image,
use the directional arrow buttons. The values shown on the lower
position of the page change with every button press you made until they
reach their maximum or minimum.
Phase
(depends on the
selected input
source)
Adjusts the clock phase to reduce image
distortion.
H. Size
(depends on the
selected input
source)
Adjusts the horizontal width of the image.
Digital Zoom
(100%)
Magnifies or reduces the projected image.
After the image is magnified, you can press Mode/enter to activate the
Pan functionality for searching the details of the projected image by
using the directional arrow buttons on the projector or remote control.
See "Magnifying and searching for details on the projected picture" on
page 31 for details.