Filter
Top Products
Operation46
Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Picture Mode
(PC: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a picture
mode" on page 33 for details.
Reference
Mode
Selects an picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the same
page below.
Brightness
Adjusts the brightness of the image.
See "1. Adjusting brightness" on page 34 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "2. Adjusting contrast" on page 34 for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a video
image. Lower setting produces less saturated colors; setting to the
minimum value makes the image black and white. If the setting is too
high, colors on the image will be overpowering, which makes the image
unrealistic.
Tint
(0)
Adjusts the red and green color tones of the image. The higher the value,
the more greenish the image becomes. The lower the value, the more
reddish the image becomes.
Sharpness
(15)
Adjusts the image to make it look sharper or softer.
Brilliant
Color
(B2)
Adjusts white peaking while maintaining correct color presentation.
When Brillian Color is set as B1, the color temperature adjustment
will not function.
Color
Temperature
There are four color temperature settings are available.
See "3. Selecting a color temperature" on page 34 for details.
3D Color
Management
See "4. 3D Color Management" on page 35 for details.
Save
Settings
Saves the settings made for User 1 or 2 mode.