Filter
Top Products
49
8.0 FINAL CHECKS
FINAL SAFETY CHECKS
1. If your child is already in the Safety Seat, check that the
harness is properly tted and tight as instructed in the section
6.1, Securing your Child in the Safety Seat / Carrier.
2. Make sure that the Safety Seat is tightly installed and secure
in the vehicle by performing the following test every time you
use the Safety Seat. Firmly push down and side to side on
the head end of the Safety Seat to make sure that the vehicle
seat belt does not loosen at all and that the vehicle seat belt is
fastened very tightly around the Safety Seat / Base. If you nd
that the vehicle seat belt loosens or that the seat easily moves
or rotates downward, please see section entitled Selecting the
Best Location for the Safety Seat to determine if the position
you have selected is adequate and check that you have
completed all of the steps in the section entitled Securing the
Safety Seat or Base in the Vehicle.
DO NOT use this seating location if the Safety Seat does not
remain tightly installed in the vehicle seat!
3. Place handle in mid storage or non-rocking position after
installing in the vehicle.